SGT5-2000E Heavy-duty gas turbine (50Hz)

The SGT5-2000E gas turbine is a proven, robust engine for the 50 Hz market, used in simple cycle or combined cycle processes, with or without combined heat and power.

It is suitable for all load ranges, including peak load, and offers outstanding fuel flexibility: You can use low-calorific gases, gases containing CO₂, H₂S and N₂ or crude oil and other liquid fuels with high viscosity. In addition, it provides low NOₓ emissions, even in the part load range.

The SGT5-2000E offers dual-fuel capability and excellent fuel flexibility: It can be fired with low calorific gases or gases containing CO₂, H₂S and N₂, as well as with crude oil and other liquid fuels with high viscosity. The engine, equipped with DLE burners, is capable to burn up to 30 vol% of hydrogen (H₂).
It provides reliable start-up and changeover between fuels. The automatic changeover from the primary to the secondary fuel can be carried out at reduced base load.

This robust engine is suitable for a wide range of ambient conditions such as cold climates, hot and dry or dusty environments. For hot and dry conditions, we offer these options to increase your power output:

An evaporative cooler or an inlet air chiller with heat exchangers to avoid performance degradation
A Wet Compression (WetC) system to enhance turbine performance by reducing compressor inlet temperatures and increasing the mass flow throughout the turbine

Ingenious design to the core

The SGT5-2000E core engine has a horizontally split casing and two walk-in combustion chambers, equipped with individually replaceable ceramic tiles. This design allows a hot-gas-path inspection without cover lift. The 16-stage axial-flow compressor with variable-pitch inlet guide vanes enhances peak load operation and supports frequency stabilization.

The robust 4-stage turbine incorporates the latest blade and vane design for stable, improved performance. The hybrid burners are able to operate in premix and diffusion mode with natural gas, fuel oil and special fuels such as heavy oil and refinery residues. With the Low-NOₓ combustion system, single-digit NOₓ emissions can be achieved.

Short installation times

The gas turbine package for the SGT5-2000E consists of the core turbine, the generator (SGen5-100A-2P) and auxiliary systems. We offer you a standardized basic design with options geared to your specific requirements. By using standard components and preassembly or prepackaging we achieve short installation times, with staggered delivery and early shipment of main components. We group subsystems and install them in separate auxiliary packages to minimize field assembly.

The SGT5-2000E fires up

We offer both simple cycle and combined cycle power plants with or without cogeneration.

SGT5-2000E-based combined cycle plants (SCC5-2000E) have a fast-start capability. You can achieve combined-cycle base load within less than 12 minutes for start-up until full load with a start-up gradient of 30 MW/min. High load gradients allow for fast load changes. With excellent peaking capability, and high part load efficiency complying with emission regulations down to lower part load, this is your profitable solution for competitive energy markets with fluctuating power demand.

Optimized for short outages to maximize availability

We offer Long Term Programs (LTP), overhaul services, field service, spare parts, reconditioning of components and modernization upgrades. Whether scheduled service or short-term support, our specialists are there for you, on-site all over the world.

The SGT5-2000E generator package is optimized for short outages. Multiple borescopic inspection ports allow inspection of compressor and turbine blades without lifting covers. The heat shields on the combustion chamber are individually replaceable. All stationary and moving blades and all stationary blade and vane carriers can be replaced individually with the rotor in place.

Fuel flexibility matters

The SGT5-2000E offers outstanding fuel flexibility: It burns natural gas, LNG, syngas, blast furnace gas, biogas, ethane, propane, condensate, distillate oil, heavy and crude oils, biodiesel, alcohols, naphtha or kerosene.

The gas turbine can also be fired with low-calorific gases or gases containing CO₂, H₂S and N₂,or with up to 30 vol% of hydrogen (H₂), as well as with crude oil and other liquid fuels with high viscosity.

Power output	198 MW
Fuel (examples)	Natural gas, LNG, sour gases, distillate oil, biodiesel, crude oil, heavy fuel oil (HFO), kerosene, jet fuel, condensate. Other fuels on request
Frequency	50 Hz
Gross efficiency	37.6%
Heat rate	9,582 kJ/kWh (9,082 Btu/kWh)
Turbine speed	3,000 rpm
Pressure ratio	12.8 : 1
Exhaust mass flow	558 kg/s (1,230 lb/s)
Exhaust temperature	536°C (997°F)
NOₓ emissions	≤ 15 ppmvd at 15% O₂ on fuel gas (without water injection for NOₓ control), ≤ 42 ppmvd at 15% O₂ on fuel oil (with water injection for NOₓ control)

Siemens combined cycle power plant	SCC5-2000E 1x1	SCC5-2000E 2x1
Gross plant power output	290 MW	581 MW
Gross plant efficiency	55.6%	55.9%
Gross heat rate	6,474 kJ/kWh (6,136 Btu/kWh)	6,440 kJ/kWh (6,104 Btu/kWh)
Number of gas turbines	1	2
Pressure/reheat	Dual/No	Dual/No

	Core engine
Approx. weight	189,000 kg (417,000 lb)
Length	10.3 m (34 ft)
Width	4.0 m (13 ft)
Height	4.0 m (13 ft)

SGT5-2000E gas turbine

Reliable, robust, and flexible power generation

Highlights of the SGT5-2000E gas turbine

Ingenious design to the core

Superior fuel flexibility

Excellent part load performance

Short installation times

SGT5-2000E package layout

Package auxiliaries

The SGT5-2000E fires up

SGT5-2000E simple cycle power plant

SGT5-2000E multi-shaft combined cycle plants

Optimized for short outages to maximize availability

Service-friendly design reduces maintenance outage time

Easy combustion chamber on-site maintenance

Fuel flexibility matters

Robust combustion system with silo chamber

Fast fuel switchover

Low emissions

Wet fuel oil operation

Part load emission compliance

Technical data

Performance data for mechanical drive

SCC5-2000E: Performance data for combined cycle power plant

Physical dimensions and weight

The SGT5-2000E is suitable for the following applications and industries:

Find out more about our gas turbine offerings

Brochures

Gas turbine portfolio (interactive PDF)

Articles and papers

Download Poster

SGT-2000E series

SGT5-2000E reference highlights

Azura-Edo, Nigeria (2018)

Az Zour, Kuweit (2004, upgrade to CC 2010)

Geregu II, Nigeria (2013)

Townsville, Australia (1999, upgrade to CC 2005)